robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
First off i am posting this here cause i don't wanna ruffle everyones feathers like i would on one or two of the other sites..
Secondly there are a lot of guys who are better and more knowledgable than I am so take my opinion for what it's worth to you..
Thirdly i am human and that gives me the right to have an opinion 
OK here it is.. A lot of people spend a lot of time talking about ever stinking tiny little detail of spey casting.. This style that style, this line , that line this much grains , that much grains,, this amount of angle change ,that amount of angle change.. well here it comes are you ready for all it?? It's all a bunch of B.S.!!!!
Buy a line that does the job you want then buy a rod that matches that line, figure out how you want to learn to cast and have fun.. The idea you need a rod with a different action for every different line or casting stroke is just a bunch of hogwash.. you can take an xlt on a 12 foot rod using a short choppy stroke and cast it just fine, likewise you can take a shooting head on a 16 foot rod with a long flowing casting stroke and cast just fine that way..
all the super technical spey junkie talk is just a bunch of opinionated B.S.... and that's the truth.....
|
REDSHED
Offline
steelie
Profile Status:
Reged: 07/26/03
Posts: 241
Loc: Peck, Idaho USA
|
|
Well said Rob!!!
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
When where not fishing we have to talk about some thing.
--------------------
Brian
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Thank you Rob. My EXACT points I tried to make on a thread. Well said.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
Gooose
Online!
Ancient Mod
Profile Status:
Reged: 09/14/01
Posts: 12784
Loc: In The Briar Patch
|
|
Rob very well put!  
--------------------
"Seen worse".....
It's Gonna Be A Long Winter
There's lies, damned lies and then there are statistics......Mark Twain
Spam Kills x 7
|
Zo
Offline
silver
Profile Status:
Reged: 08/31/04
Posts: 112
Loc: S. Idaho
|
|
I guess to each his own, but me being the perfectionist, that I am, I want to spend a lot of time talking about ever stinking tiny little detail of spey casting.. This style that style, this line , that line this much grains , that much grains, this amount of angle change ,that amount of angle change...to me, this is "Steelheading".
Talking with a group of people (like yourselves) about what technique works for you, what tips your throwing and for where. Then spending x-amount of time looking said river up on the internet from topos to fishing reports. And if my fiance and the good lord willing, I'll make a trip to said river. Whether I catch a fish or not is irrelavant (I enjoy catching, and love to fish), it is the commrodery and thrill of the hunt,and all the other macho-killer-instinct that is ingrained in all of us to some degree that cranks my chain.
I agree, some or most of the above may be impractical, but it is "Steelheading", GLs or PNW it is still "Steelheading", Chuck N' Duck a nymph or swinging a spey...yup it's still "Steelheading". I will never critisize a man's fishing technique or his doq, because...
To each his own.
--------------------
Alonzo
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Zo, the point Rob was getting across (and I was as well on another board) is that a Steelheader doesn't have to know every little aspect of the rod/lines makeup. Some of the best steelheaders I knew (fly and gear) could tell you the make and capacity of their outfit, that's about it. I think too many get into the nitty gritty over details when they could be out fishing (I'd much rather be out on the river then stuck in the house as I am now). My definition of a Steelheader is someone die hard who is out fishing steelhead. I know quite a few guys who can spout off every last spec of flyrods and lines, but are only marginal fisherman. Preaching is one thing, practicing is another. When I started spey fishing, I didn't get into it for show, or some higher form of fishing. I saw it as an excellent tool for flyfishing certain areas that had been a pain in the past for me. Found it to be an excellent tool, but is NOT meant for every aspect of my fishing lifestyle. I fish from a boat alot, and found one handers fit "me" better there. From the banks, especially tight ones, I found the spey to help me out. Plus, learning to spey cast, trickled over to my one handers (thanks to Fred and his insights in the past). I love working a speyrod, but I don't dwell on them. I'm out there to fish, not the tackle I have handy. Steelheading is about fishing steelhead, tackle to me is just a means to an end.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
Yes to each their own.. the only problem is that a beginner comes along and reads all this stuff and gets totally confused or worse yet misinformed. I'll say this when it comes to learing about spey casting the net is ok.. However for learning how to cast or what gear to buy the internet sucks!
One thing I would say about information gained off the internet.. Buyer beware,,,
and um sorry but shuck and duck... ahh well for the sake of the forum i won't go there
|
williegunn
Offline
king
Profile Status:
Reged: 09/23/03
Posts: 127
Loc: Banff Scotland
|
|
Opinions are like @rseholes everyone has one. (unknown)
In Scotland we take our spey casting seriously, the world champion for the last couple of years is Scottish, BUT it is just a method of fishing, just a way of getting the fly out to where the fish are. There are two casts you need,single and double spey with either hand up. The rest is just patter.Snake rols, snap Ts, only used to impress the wee lassies watching.
--------------------
Malcolm
<")////<
Edited by williegunn (12/01/04 01:18 AM)
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Oooo, that's true Malcolm. The ladies do go "ahhhh" over a finely thrown spey cast. I know my girlfriend fell in love watching me, and picked up my extra rod and started doing it herself. Mine wasn't finely tuned. Wonder what would've happened if I was really good at it? LOL
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
wiser?
Offline
otter
Profile Status:
Reged: 04/15/02
Posts: 232
Loc: Gresham Oregon
|
|
I'm not a spey caster or even much of a fly angler but I feel the "super technical spey junkie talk" is much better than calling anything negative opinionated B.S.. Saying it's not necessary is one thing, calling it opinionated B.S. would be akin to slamming half the content of most posts about rods, reels, egg cures, boats, techniques, etc.. Might as well say anything more than a rod, stout line, cork and gob of eggs for salmon fishing is opinionated B.S.
This is an area to share techniques and ideas, not a place to call others ideas opinionated B.S..
Still think mom was right when she drummed into me "If you don't have anything nice to say" .... you know the rest.
The opinion there are anly a couple things required to effectively spey cast is certainly a valid opinion, I just have a problem with the name calling associated with it.
Guess it could just be me. I don't agree this post was "well put" at all. Just my opinion, of course.
|
Kerrys
Offline
steelie
Profile Status:
Reged: 06/30/04
Posts: 180
Loc: Skagit
|
|
Quote:
Steelheader69 said:I know my girlfriend fell in love watching me, and picked up my extra rod and started doing it herself.
I could have a field day with this statement.
I agree Rob. But as other have said what would we do when the river is blown? What would we talk about in the truck when heading up to the blown river? Ask Homer what I think of all of this line stuff. I still say it isn't the tapers that we splice up that turns the line over. It is the 15 foot of lead core on the end that does it.
--------------------
just another steelheader
|
REDSHED
Offline
steelie
Profile Status:
Reged: 07/26/03
Posts: 241
Loc: Peck, Idaho USA
|
|
Quote by Kerry: "I could have a field day with this statement."
Good one Kerry!
I like all the "tech" talk, for myself. I've learned a great deal about spey casting but for the new guy it seems it can be pretty confusing. From fishing the "junkyard spey" I know that a good time can be had fishing with some pretty crude tackle. As Rob says, it should be about fun.
The main issue I have with some of this "spey casting dogma" is that it is presented like it was written on stone tablets and brought down off the mountain by a man with a long beard.
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Funniest thing of all Kerry, your "field day" would probably be true too.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
Zo
Offline
silver
Profile Status:
Reged: 08/31/04
Posts: 112
Loc: S. Idaho
|
|
Far be it for me to act the expert, because I AM a beginner. I don't think I have fished my spey rod more than twice, and I have cast it on about 10-12 occasions. I have found the Internet to be a VALUABLE resource...regardless of the qulity of information. Even the worst information is good, 1) an observant person can pick up on the BS pretty quick 2) its a good heads up of what NOT todo.
All the tech. talk and Opinionated BS is either/or, someone who has done something that has caught fish and choses to share the information with others. What you do with it or say about it after words puts it into either catagory. No one is obligated to utilize it or implement it into their repitoir (SP), Nor are they asked to tear it to shreds.
My BS detector is going full bore when I get into something new, but I listen to EVERYTHING. Then I test and try and fiddle and change until I consider another variable or get bord.
I think what the point of this thread is, is that there are two basic fisherman (of course there are extremes), those who couldn't give two farts about what head will work best with which rod, all they want to do is get outside and experience mother nature in all her glory. If the fish-gods see fit to bless said fisherman with a take...woo hoo.
The other fisherman looks to utilize all of his resources to maximize his experience outdoors. I agree, an idiot/status seeking person would spend the money on the next best thing, but a true fisherman will want to understand as much about his choosen quarry and weapons at hand. And if the fish-gods see fit to bless him/her with a take...woo hoo.
I find EVERYONE's opinion helpful, yeah, opinions are like...uh..., but you shouldn't make excuses for it (either one) and no one should ridicule or apologize them because you should no better than to expect everyone to be just like you.
I think I'm  Cheers.
OH, BTW, I haven't caught steelie on the Two Hander, but I let me bro-in-law use it on his trip to the Kalam, and the dirty SOB caught 34" native hen! HE CANT EVEN CAST THE THING VERY WELL!!! He is the only one I will call BS on with re: to his technique. You don't catch the 1st fish on another man's new rod, you just don't, its bad Ju Ju.
--------------------
Alonzo
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
KISS and have fun.
Forget all this dark technical spey abyss stuff I am three years into it now. Get a windcutter and some tips matched to your rod and fishing situation and have fun and be more productive in your fly fishing, thats what its all about. BTW, my first line for my spey rod was an old SW WF sink tip which I cut and put my own Deep Water express heads on and you know I could cast it, I caught fish, etc.. Fished with that for 10 months than got the RIO WC.
Although I will be reading the new Spey casting bible book soon, just to throw a fancy cast out there once in a while for the 1-2 fisherman that may be around, you know impress them, not the fish thats for sure. LOL
BG
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
Edited by Black_Ghost (12/01/04 11:26 AM)
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Zo, for myself understanding my "tools" is knowing how to use them. I don't dwell that much into the finites. Knowing the grains on the rod isn't going to help me put the fish on the line. Working the line will. I've been spey fishing about 5 or so years now. When I started, couldn't cast it to save my life. BUT, I was able to get the line out enough and work it and catch fish with it. Takes more then casting to catch the fish. Understanding the fish and how to present your offering is as important, if not more, then just the dynamics of casting. Just prettier looking while your casting if you know what you're doing.  I know I had some very successful years steelheading with the fly, and had NO idea what I was doing casting. But once I got the mending down, and how to work the fly, it upped my catchrate. When I got casting down, just made it easier to get the line out. Hell, had a friend who was taught by an FFF instructor to throw a fly rod (not a spey). Can't catch a fish to save his life. But he can sure throw a pretty line. I look like someone having a spasmatic attack, but I can work the fly and catch fish. LOL.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
Gad Zooks! I'm off the board for 24 hours and it goes to heck in a hand basket. :>)
Actually, a proper match up of rod and line (especially for a newbie) is all important. (And a non-paid advertisement here for Burkie spey rods...) I've two, the 7wt 13'6" spooled with a medium head 7 wt airflo (also excellent with the 6/7 xlt) and the 8wt 13'9" spooled with a 7/8 xlt. The two rods are my ONLY choice to hand to a 'wanta-be' spey caster to teach them the basics. (This includes my two grandsons who've never held a fly rod in hand in their life.)
The choice of rod/line is all important (personal opinion here) in getting someone 'into' this type of equipment. New caster having trouble .. odds on they've got a rod/line that's not suited to their 'style' of casting ... beginner or experienced caster.
To the very good casters (don't count me in on that one) it probably doesn't make a heck of a lot of difference. Too the rest of us, it makes a heck of a lot of difference. I've got something like 14 different spey rods; some of which haven't seen a line in two or three years. Why, they don't match up with 'my style' of casting .. and I really don't want to dump another $75 bucks for lines to 'keep testing.' For someone else, they'd probably be the cat's meow.
All the more reason to go to a real spey shop such as Redshed, Aaron's place in Carnation, Spey 'Claves, etc., where you can actually test cast combinations of rods/lines/etc.
If you have/get "the bug" spey fishing is a VERY expensive 'lady friend.' (And no, I'm not going to touch the great one liner above ... but God do I want to??!!)
"...Get a windcutter and some tips matched to your rod .." Here Hal, I'd have to disagree with you on line choices for 'a beginner.' A great line, but for a 'newbie' ... he/she will learn too many 'bad habits' in casting .. especially if 'self taught.'
Fred
--------------------
Fred A. Evans
Edited by fredaevans (12/01/04 03:33 PM)
|
Zo
Offline
silver
Profile Status:
Reged: 08/31/04
Posts: 112
Loc: S. Idaho
|
|
Quote:
fredaevans said:
... disagree with you on line choices for 'a beginner.' A great line, but for a 'newbie' ... he/she will learn too many 'bad habits' in casting .. especially if 'self taught.'
Ahhhhh, shhhhhhooot, chaulk it up to inexperience, iguess.
--------------------
Alonzo
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
LOL. Zo, I know exactly what Fred's talking about. You learn more from a longer belly line. I found from my limited experience that the short heavy belly helped correct some of your mistakes. But then when you moved up to more of a longer belly, your cast would fall apart. Now, if you only planned to use the WC's, you'll be fine. I found I liked using the longer bellies. Well, that's until I blew out my back/shoulder and couldn't cast a flyrod anymore. LOL.
But funny, here I was mostly self taught, with some help from friends who knew how to speycast. I had a few speys, and was trying a couple different rods out. Girlfriend liked it, grabbed the spey rod, and was outcasting me instantly. LOL. Was trying to figure out the longer bellied lines. She was zipping out a WC (she's a natural with flyrods). Now, my next step. Putting a real fly on and having her cast it. She's awesome with a practice fly. Once she knows the real thing is in there, she gets skiddish. LOL.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
I jump in with both feet going different direction when I started with a spey rod. I bought Sage 9140-4 (remember the old handle on this rod) with a Windcutter 9/10/11 I went out and had trouble with it. When two friends saw what was happen with the line they cut it up BIG TIME, I ask them what are you guys doing and they said trust me on this. Since then I trusted them on there opinion on anything to do with spey rods and spey lines period!
I learned a lot from those two guys, one thing I’ve learned from them it’s a lot easier to cast a short belly line (3 times the rod length not more then 3.5 times the rod length) then a long belly line! These two guys are on the cutting edge of spey casting in the PNW with designs of new rods and spey lines and types of spey casting!
--------------------
Brian
|
REDSHED
Offline
steelie
Profile Status:
Reged: 07/26/03
Posts: 241
Loc: Peck, Idaho USA
|
|
You are a very lucky guy to have those two friends!
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
Well Fred I had 41 years of single handing casting experience before I bought a spey rod, so I would not consider myself a newbie to fly casting. It wasn't rocket science to grab it with two hands and start doing simple casts.
So what line do you recommend for a spey new bie ?
I even used a SA Head Start line for several months on the spey rod before the wind cutter was bought and it worked well enough.
BG
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
|
robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
Brian
Sage is an awsome company and the whole flyfishing industry is indebted to them but some of their earlier spey rods were umm well i'll just say, I don't like them..
the reason your two friends had to cut up the line , well there are two reasons but i am sure their reasonong had largley to do with the fact that they couldn't get the 9140 to perform the way they wanted it to with a longer bellied line. in my opinion this speaks to the incabability of that rod not the need for shorter line..
A well designed spey rod should cast every line on the market designated for that size rod and it should cast them all well.. any rod that doesn't simply isn't a well designed rod.. The idea that you need a different action rod for short heads VS long heads is absolutely Bogus there is no truth to it whatsoever..
when it comes to a line for beginners here is what i say..
if you just wanna fish get a wind cutter... if you wanna kearn to cast get a salmon double taper.. I think the windcutter is a great line to learn on BUT!!!!!!!!! you are going to have to refine your technique as you gain skill because it will hide numerous casting faults which will become very apparent when you start throwing a longer belly line..
line choice just depends on how you want to fish and what kind of caster you want to be..
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
"Now, my next step. Putting a real fly on and having her cast it."
Jerry, she will find this to be a 'whole new ball game.' Casting a small chunk of fluff vis a vis an acutal 'fly under water.' Actually, this is where you find out the differences between lines on a given rod.
On Rob's comment above .. I have 'production rod' #4 of the "old" Sage 9140-4's and still love the 'traditional action' of this rod. But his point is correct: a long belly/long taper line with this rod could be a 'DE-Sas-Ter.' A medium length head line (if two line ratings, take the higher one to match the rod .. maybe even drop down one with a longer head line.. ) could be a good combo given the deep loading of this rod.
And another great "nod" to the Burkie rods; if it says it's a 7 it's a 7, an 8 it's an eight. Can't say that for many other rods; some I've found to be at least THREE 'line weights' off from whats pasted on the rod (example: One of Bob's new 16 footers was designed to be a '7-8-9,' loaded/fished best with a 9-10. Quite a difference, but then it was a Proto and that was the point of giving the equipment a REAL work out.)
"A well designed spey rod should cast every line on the market designated for that size rod and it should cast them all well.. any rod that doesn't simply isn't a well designed rod.. The idea that you need a different action rod for short heads VS long heads is absolutely Bogus there is no truth to it whatsoever.."
Well.. think this statement is a bit over-kill ... but still a lot of truth to same. Ergo, back to the GO TO A spey 'clave, etc., and test drive some combo's before you drop the 'big bucks.'
So what a re 'big bucks?' Will by time you purchase a 'high end' spey rod, ONE line, and a reel to hold same ... you could be in close to $1,000. (No shxt!)
--------------------
Fred A. Evans
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Oh, Fred, I should say this. My "practice" flies aren't yarn and such. I actually use a standard fly, and simply cut off the whol hook point area. So pretty much a real fly, just nothing left to actually hook you. To clarify, I leave the bend in it, just gets cut at the bottom of the bend where it straightens out into the hookpoint/barb. Yeah, I've found you get a more real "cast" that way then without the fluff on the end. She's fine as long as she knows that what's on the end isn't going to hook her. It's once the real thing is on the end that scares her. LOL.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Quote:
fredaevans said:"A well designed spey rod should cast every line on the market designated for that size rod and it should cast them all well.. any rod that doesn't simply isn't a well designed rod.. The idea that you need a different action rod for short heads VS long heads is absolutely Bogus there is no truth to it whatsoever.."
Fred, how could you?? Now there are alot of married (and attached) guys who have no excuse to buy more spey rods. Sheesh, you gotta look out for the younger generation and they're "good excuses" to buy stuff.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
Rods have come a long way’s in the last three years!
Three years ago we said they came along way in the last five years!
There are a lot more good rods on the market today.
Testing Meiser rods this summer I found several lines for each rod, I had a lot of lines before I started playing with his rods, but when I started testing them I bought 6 more lines and had a lot more giving to me to cover the field.
The rod of choice up on the Skagit for years was 8124-3 it was tough to throw a long belly on and are “Skagit Lines” suited them just fine ( KerryS line as a example, I mean a Brad line) after watching Ed and Marlow use there “Skagit” line and there theories of lines change my direction on lines. But with the rod I will use this winter; I’ve used three different lines, my standard “Skagit Line” (That I make 41 foot head), SA Spey Short Head (Al Burr line, customize with Ed Ward style sink-tips 45 foot head) and Carron Jet Stream (75 foot head?).
I just played with Rio’s new “Skagit Line” (45 foot head with there tip’s) this is a different animal.
--------------------
Brian
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Brian, I remember at the clave where I met you, what Simon G had said. That it's hard to find a poorly made spey rod made today. If memory serves me right, he grabbed a lower end reddington off the rack and was tossing a full line. BUT, it was Simon too. LOL.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
There are some junkers out there, but like I said above "There are a lot more good rods on the market today"
--------------------
Brian
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Yeah, well, haven't had a chance to toss any speys in a good year or more. So I'm a bit out of the ball game. Got to look at a bunch, and see them cast. But that's about as close as I've got (sold off all my speys  )
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
Kerrys
Offline
steelie
Profile Status:
Reged: 06/30/04
Posts: 180
Loc: Skagit
|
|
I love my 8124. I will be fishing it again this weekend. It is the oldest rod I own and it still out performs many of the new ones I have and have tested.
--------------------
just another steelheader
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
Quote:
Steelheader69 said:
Quote:
fredaevans said:"A well designed spey rod should cast every line on the market designated for that size rod and it should cast them all well.. any rod that doesn't simply isn't a well designed rod.. The idea that you need a different action rod for short heads VS long heads is absolutely Bogus there is no truth to it whatsoever.."
Fred, how could you?? Now there are alot of married (and attached) guys who have no excuse to buy more spey rods. Sheesh, you gotta look out for the younger generation and they're "good excuses" to buy stuff.
Whoa big fella .... I didn't 'say that,' that was a quote from someone else above in the thread. And 'Good on you' for using a 'real fly' for your ladies practice. Most folks don't start this way (assuming an instructor) and the feel of the rod loading is very different with a sinking fly vs. a 'dry fly.'
Edit: I'll toss in another .02 cents here on knowing several different spey casts (Sorry Willie). But I think it's very important that even someone who uses a single hander know how to do the 'snake roll,' 'Circle' or 'Snap T' (I'd even recommend Steve Choate's 'Single Spirle (sp?)' as all of these casts are designed for situations where you have next to zero room behind you to form you D loop.
More importantly is all of these casts can be easily done with either type of rod. The 'rod don't know.'
That's my story ... and I'm sticking to it!  
I can hear the 'gun fire' a-cummin.
--------------------
Fred A. Evans
Edited by fredaevans (12/03/04 08:52 AM)
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
LOL. Sorry, I missed the quotes. LOL. Gotta go back through there and get em'.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
williegunn
Offline
king
Profile Status:
Reged: 09/23/03
Posts: 127
Loc: Banff Scotland
|
|
Quote:
fredaevans said:
[several different spey casts (Sorry Willie). But I think it's very important that even someone who uses a single hander know how to do the 'snake roll,' 'Circle' or 'Snap T' (I'd even recommend Steve Choate's 'Single Spirle (sp?)' as all of these casts are designed for situations where you have next to zero room behind you to form you D loop.
More importantly is all of these casts can be easily done with either type of rod. The 'rod don't know.'
That's my story ... and I'm sticking to it!
I can hear the 'gun fire' a-cummin.
No no no
All you need is a single/double spey, if there is no room behind angle the rod into the stream dropping the anchor 2-3 rods lengths out the cast as normal the D loop stays inside. It probably has a daft name but it is simply a single spey with lean.
--------------------
Malcolm
<")////<
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
I determined to learn spey casting this summer after over 50 years of single handed casting and a false start to learn spey casting 10 years ago. I learned by myself, with a little help from Rio's video and other anglers. I am well pleased with my progress. I have used a wide variety of rods, with very different actions, without problems and they all cast acceptably if the line weight matched Simon Gawsworthys for the rod.
I used short head lines first because I read they were easier to learn with, but soon became tired of stripping and now prefer longer lines, except with sink tips. I know the pride of owning custom equipment and all, but I cannot see the real need for any but the low range rods. If you have to get the last 5% out of the rod/line maybe they are needed. However after much time observing spey casters with floating lines and sinktips both, I would say 99% don't need it. Most cast less than 50', even on a river 150' wide.
My .2 cents worth.
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
Verne wrote:
"However after much time observing spey casters with floating lines and sinktips both, I would say 99% don't need it. Most cast less than 50', even on a river 150' wide."
How true!!
I'll put my .04
--------------------
Brian
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Yup, agree with Brian and Verne. I know when I used my spey, I rarely put more then that much out. For myself though, it was a high bank issue I started using it (limited backcasting). Then, once I found the easy of mending and how much longer I could keep the fly in the water while banking it, I fell in love. BUT, I do fish boats alot, so in the boat I'm running a single hander. On the bank, will break out the double hander.
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
I see some very real advantages to spey cassting, although I can fish almost anywhere with a one-handed rod.
One curious thing I have noticed is the lack of fight in steelhead hooked on spey rods, of the half dozen or so I brought to hand I haven't had a decent fight. Am I just getting a poor run of steelhead?
|
williegunn
Offline
king
Profile Status:
Reged: 09/23/03
Posts: 127
Loc: Banff Scotland
|
|
There I am blasting out 40 yds constantly. The whole Lee Wulff intermediate to the backing, thats Spey Casting
--------------------
Malcolm
<")////<
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
Good for you, I love to make long casts, and would like to be able to cast that far consistently. Maybe next year.
I don't see any purpose in casting that far anywhere I fish and I couldn't mend a TT at that distance if I did.
Maybe when my Daiwa amorphous rod arrives from blighty I will be able to cast like you.
I like spey casting very much, I just think we tend to make it appear too difficult, expensive and cultish sometimes.
|
robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
no no no!!!! you guys all need to be buying very expensive American made rods!! green ones especially..
All kidding aside most spey rods on the market, even the really bad ones will outperform even the very best single handed rod. However there are some high end spey rods that are worth the extra bucks, IF: 1 you have a skill level that allows you to tell the difference and 2, the finer qualities of a superb rod are important to you.
if thoes two things aren't an issue for you then there is no reason to spend the money on a high end rod. To some people thoes things are issues and for that I am thankful because thoes people keep me employed:) all that said i could probably catch just as many fish with a st croix but i'd work harder and enjoy it less.
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
Well said Rob.
Willie Gunn noted: "if there is no room behind angle the rod into the stream dropping the anchor 2-3 rods lengths out the cast as normal the D loop stays inside. It probably has a daft name but it is simply a single spey with lean."
Malcom, without actually seeing what your describing, the above sounds very much like a cast called the "Perry Poke." Cast is primarily used with 'tips/sinking lines' to move them out of the water. Also the 'fall back cast' if you blow one. You can almost always 'reset' a busted cast by coming back and resetting the line for the "poke."
Fred
Fred
--------------------
Fred A. Evans
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
The whole idea is to have fun, whatever makes you happiest doing it is great.
That being said, I don't see much difference cosmetically or in castability between high range and low range spey rods. I have seen some high price ones with lousy cork, cheap guides, etc.
When I was young you could tell a good cane rod by the finish, wraps and spacing of the guides.
I personally don't care for short stiff spey rods (12' 9 wt.), but that is just me.
|
robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
Vern , your first comment is right on it is all about having fun, you are also right on cosmetics however i have to say one thing.. good cork is EXTREMELY!!!!! difficult to comeby I mean EXREMELY!!! and when you do find it you should expect to pay 1.25+ per ring and it takes between 30 and 40 cork for spey rod handle. and again that only when you can find good cork! you'll see very very few rods regardless of quality with good cork. Most of the cork that looks good is simply bad cork that has been well filled. Quite frankly i am very very happy that most manufacturers will use whatever they can get in terms of cork otherwise the price would probably be 5 bucks a ring easy and it would be absolutely impossible for anyone but a big manufacturer to get good cork. My only point here is that guys are using lesser quality cork because they simply have no choice, it's just a sign of the times there just isn't much good cork around... it's either make rods with poor cork or don't make rods at all it's that simple...
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
I have no quarrel with anyone, I much prefer poor cork to the alternatives, and prefer plain wraps etc.
I would love to have a custom rod and maybe if I get good enough I will decide to get one.
I discovered that it takes a lot of commitment to learn to spey cast and admire watching good casters.
I am a little perturbed by the flyshop individual that told me if I wanted to learn to speycast I had to buy an $800.00 T&T because nothing else would work. He also wouldn't even let me try one out. I don't have quite that level of trust so I bought inexpensive rods on eBay and experimented with them. I didn't get a single one that didn't perform adequatly. I wouldn't suggest others try that.
Thats enough on my spey education.
|
robA
Offline
returning spawner
Profile Status:
Reged: 05/14/03
Posts: 44
Loc: Vancouver Wa
|
|
Verne, given that experience I'd feel the same way anyone asking you to make an investment of 800 bucks should make an effort at the very least to get you out on the grass to cast the rod.
One thing that I see as a major problem in a lot of retail operations is people passing their opinions and preferences off as the only truth. There are some rods out there that I feel are really poor rods yet these same rods are dearly loved and even revered by others. it's all opinion. What part of the state are you in Verne? IF you'd like some less formal instruction we could spend a day together fishing...
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
"so I bought inexpensive rods on eBay and experimented with them. I didn't get a single one that didn't perform adequatly."
Verne, what rod(s) did you get? And what lines did you run on them?
--------------------
Fred A. Evans
|
Verne
Offline
chum
Profile Status:
Reged: 06/04/04
Posts: 65
Loc: Washington State
|
|
Rob, I live in Tumwater.
Fred,I got
1.Loop Adventure 12'4" best line I used was an 8/9/10 windcutter.
2. Clan 13" carbon best line I used was a 7/8/9 windcutter.
3. Cortland CL 13' best lien is a 7/8/9 windcutter.
4. Orvis Trident 1267 midflex, best line used is a windcutter 6/7/8 or cut down 7/8/9 wc. Nice light rod.
5. Orvis Trident 1510 tipflex, best line 10/11/12 windcutter or 9/10 xlt. very powerful rod, will do it all.
6. Redington 14', best line sa 10/11 spey or a hybrid rio windcutter upgrade thing I have. good all around.
I am waiting for a 15' Daiwa amorphous Jim Love special I bought last week.
I sold the Clan and Loop, I liked them the least of my rods.
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
Quote:
5. Orvis Trident 1510 tipflex, best line 10/11/12 windcutter or 9/10 xlt. very powerful rod, will do it all.
Thats the one I just picked up, yep its powerful for sure ! LOL
BG
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
|
REDSHED
Offline
steelie
Profile Status:
Reged: 07/26/03
Posts: 241
Loc: Peck, Idaho USA
|
|
Hmmmm, BG, I thought the one you just picked up was a 14' 9wt.
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
Yes thats right 14' 9wt
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
|
BobK
Offline
Thick Tail
Profile Status:
Reged: 07/17/03
Posts: 2161
Loc: Upstate NY, Lake Ontario Tribs
|
|
Which one IS it, Hal? Or can't you read the writing just ahead of the grip???
BobK 
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
I taped over it so no one will know what vendor and model it is. LOL
BG
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
|
williegunn
Offline
king
Profile Status:
Reged: 09/23/03
Posts: 127
Loc: Banff Scotland
|
|
Quote:
Black_Ghost said:
I taped over it so no one will know what vendor and model it is. LOL
BG
Quite right, if the company don't pay sponsorship why should you show their name?
Do you chisel the badges off your car and snip the little badges off your clothes as well.
--------------------
Malcolm
<")////<
|
Black_Ghost
Offline
Thick Tail
Profile Status:
Reged: 06/13/03
Posts: 5177
Loc: Western GLs
|
|
This site is not like other fishing sites where non sponsors cannot be named or their sites linked to.
How can we discuss topics adequately when being censored and precluded from naming all vendors etc..
Freedom of fly fishing information I say !
Three Cheers !
BG
--------------------
"The ability to delude yourself may be an important survival tool."
Jane Wagner
|
Steelheader69
Offline
Nooch Diver and Camp Cook
Profile Status:
Reged: 12/30/00
Posts: 8141
Loc: Graham, WA
|
|
Malcolm, I think Hal did it, so that the company who made the butt section doesn't get mad knowing that brand A made the midsection and brand B made the tip. Heard of frankenfish? Now we have "frankenspeyrod".
--------------------
TEAM JACKSON BALDWIN
Project Healing Waters
CampChef Prostaffer
|
williegunn
Offline
king
Profile Status:
Reged: 09/23/03
Posts: 127
Loc: Banff Scotland
|
|
Hal
Come on then what is the real reason for the taping over?
I thought you had wriiten to Orvis asking them to sponsor you for using their rod and when they refused taped it up. I realise what a tight fist you are.
--------------------
Malcolm
<")////<
|
H2H
Offline
TWO-HANDER !
Profile Status:
Reged: 02/07/04
Posts: 727
Loc: CHROME TRIANGLE !
|
|
Hey guys BG ask me about a line for his new rod!
So; It will take $$$ for me to say what the rod is!
And I take paypal!
--------------------
Brian
|
Zo
Offline
silver
Profile Status:
Reged: 08/31/04
Posts: 112
Loc: S. Idaho
|
|
I only pay in Yen and flies now...that work.
--------------------
Alonzo
|
fredaevans
Offline
Thick Tail
Profile Status:
Reged: 06/12/03
Posts: 4010
Loc: Upper Rogue River- Oregon
|
|
Sigh ... Malcom .. I've been living with this twit for over three years ... somethings NEVER change. Hal 'spills' more than I drink, and he still can't come up with $75 bucks to buy a reasonable flyline.
God help him if he ever falls in love with the Brit Carron line at $135 USD. 
--------------------
Fred A. Evans
|
BobK
Offline
Thick Tail
Profile Status:
Reged: 07/17/03
Posts: 2161
Loc: Upstate NY, Lake Ontario Tribs
|
|
Does anyone
|
BobK
Offline
Thick Tail
Profile Status:
Reged: 07/17/03
Posts: 2161
Loc: Upstate NY, Lake Ontario Tribs
|
|
Does anyone here really give a big rat's - umm, let me rephrase that - care which rod he has???
 
BobK
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
[Re: