ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
I'm looking for a halibut reel and know nothing about what I need. I don't fish for them locally, or at least haven't yet, but I may start, I do go AK every year and hate to use the junk they have on most charter boats. I may buy a new rod too, but I have one that's never had a reel on it, kind a of a cheap 50 to 80# model. I was looking at a Lamiglas 80 to 100# roller tip, let me know if this is what I need.
Thanks.
|
Greg_G
Offline
FLOSSER
Profile Status:
Reged: 04/08/07
Posts: 1020
Loc: FISHING
|
|
Well depends on how much you want to spend if you want a good one and dont mind spending some money look into a Okuma Titus Gold but if you dont want to spend more than $150 look into a Shimano Charter Special
Greg
--------------------
WORKING ON MY PECKERWOOD IMAGE
|
jimh
Offline
Salted and Unsalted Boater!
Profile Status:
Reged: 10/27/02
Posts: 4277
Loc: Area 8.1, 8.2, 9 or an S river...
|
|
I'd probably buy a Penn GT345 in the normal price range reels. It's a 50 lb line class reel. I don't think you want to go smaller. You could buy a tuna reel like an avet, but that I think that's overkill since from all I've read they don't really do smoking runs. You could go two speed reel, but that's a lot more money. I think the 50 to 80 model rod is probably fine if it has a roller tip.
--------------------
Wear a PFD if you want to live.
|
Gooose
Offline
Ancient Mod
Profile Status:
Reged: 09/14/01
Posts: 11013
Loc: Area 12
|
|
One thing to consider is how deep you plan on fishing butts. Personally I hate fishing deeper than 300 feet and there are plenty of places to successfully fish butts within that depth range. A smaller reel such as a Penn 10 loaded with 65 pd braid would suffice for that. Deeper depths down to 600 feet with heavier gear then look at heavier reels and several of my buds have gone to electric driven reels which are legal.
--------------------
Independent Advocate For The Fish
Not Represented By Any Organization
Simple Solutions to Simple Problems
Simple Solutions to Complex Problems
There's lies, damned lies and then there are statistics......Mark Twain
|
ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
I've got a Penn 309 and a 149, didn't think the 309 was big enough though. I'm not into the 300'+ stuff, I pulled a 160# butt from 300' this summer and that was work, heck just cranking it up with nothing on was a lot of work. I don't think I fish for them enough to justify an electric reel.
Thanks for information so far.
|
Greg_G
Offline
FLOSSER
Profile Status:
Reged: 04/08/07
Posts: 1020
Loc: FISHING
|
|
We fished for them in 700+ with 2 pounds of weight and that was a pain in the butt let alone a 30 pound ling pullin down on it
--------------------
WORKING ON MY PECKERWOOD IMAGE
|
jimh
Offline
Salted and Unsalted Boater!
Profile Status:
Reged: 10/27/02
Posts: 4277
Loc: Area 8.1, 8.2, 9 or an S river...
|
|
I think the 309 is too small, too. Like I said go for the 345.
--------------------
Wear a PFD if you want to live.
|
Alaskan
Offline
ultimate predator
Profile Status:
Reged: 02/18/03
Posts: 395
Loc: Anch. Ak
|
|
I can't comment on Butt fishing down there, but up here I use a Penn 330GTI, but wish I had a 345. I run 65# braid and have never had a problem. One of these day's Illl step up to a Shimano TLD 2 speed though.
As far as rods go, stay away from roller tips. Get one with a ceramic tip. The rollers rust and seize up, or the line slips off (especially braid) and gets caught up between the roller and the frame and then it fray's the line.
|
Mojo
Offline
Instigator
Profile Status:
Reged: 09/10/03
Posts: 7399
Loc: Bootsville, Idaho
|
|
Shimano Tekota 800. Great reels, hold a ton of line.
--------------------
Tight Lines,
Mojo
TEAM MOOSE DROOL
TEAM SMOKIN' MERC
TEAM JACKSON BALDWIN
Alaksa Nitro Baits Pro Staff
|
Greg_G
Offline
FLOSSER
Profile Status:
Reged: 04/08/07
Posts: 1020
Loc: FISHING
|
|
Ya those Shimano Tekota are good reels too
--------------------
WORKING ON MY PECKERWOOD IMAGE
|
ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
Should I be spending that much on a reel that will be used only a couple of times a year?
|
Mojo
Offline
Instigator
Profile Status:
Reged: 09/10/03
Posts: 7399
Loc: Bootsville, Idaho
|
|
Well, if it makes a positive difference on those few trips, but you can keep using it for years, my answer is yes.
I bought a couple of Okuma reels for sturgeon fishing, and they basically fell apart after a few trips. I replaced them with then next higher product line reel, and the same thing happened. I figure I spent 130.00 for my Tekota 800 on e-bay (NIB), and used if for several years. I'd have spent more buying a new Okuma every 4 to 8 trips than I have already on my Tekota, and it is still kicking butt.
I've caught a bunch of big sturgeon on my Penn 330 GTI reels as well. I'd consider the 330 GTI or the 345 GTI the minimum.
--------------------
Tight Lines,
Mojo
TEAM MOOSE DROOL
TEAM SMOKIN' MERC
TEAM JACKSON BALDWIN
Alaksa Nitro Baits Pro Staff
|
ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
Thanks
I was looking on ebay at the 800, I saw them for 159.00 or so. I'll check one out and see what it feels like in my hands. I need to check and see if they make it in a lefty model, I can go either way, but I use left handed baitcasters when I can.
|
Mojo
Offline
Instigator
Profile Status:
Reged: 09/10/03
Posts: 7399
Loc: Bootsville, Idaho
|
|
I don't think they make a lefty, but I'm not sure. If you buy one off e-bay, contact Shimano and make sure it was manufactured after they "fixed" the drag problem. When the first 700 and 800 models were manufatured they had an issue with the drags being so smooth (literally so low friction coefficient) that the had drag creep. The line would very slowly roll off the reel even with the drag cranked. Shimano provided drag replacement kits free of charge. My reel is a couple years old, and it has the "new" drag. Never had a problem.
That's the only thing to wtch for on these reels that I know of.
--------------------
Tight Lines,
Mojo
TEAM MOOSE DROOL
TEAM SMOKIN' MERC
TEAM JACKSON BALDWIN
Alaksa Nitro Baits Pro Staff
|
ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
Thanks, good info.
|
CastawayChris
Offline
Got Beer?
Profile Status:
Reged: 11/27/03
Posts: 2562
Loc: Sequim, Wa
|
|
Personally as far as Penn reels go, i would buy the 113h or the 114h or bigger and not bother with the GTI series for they are not built as tough as the senator series reels, rather cheaply built with lots of plastic!
--------------------
TEAM GLO BUG WHORIN
Rattlesnake Prostaff
Vision Hooks n Tackle
Rainshadow Prostaffer
|
Trouthead
Offline
Subject of the Puritan Rep. of Washington
Profile Status:
Reged: 09/17/02
Posts: 4461
|
|
Another vote for the 113H or 114H. I also use a roller tip and a double roller stripper guide and have never had a problem. I will use dacron instead of braid sometimes for 80lb. and less. My 114H is loaded with 130 lb. braid.
--------------------
Trouthead
ABU/Ambassaduer Rest Home - Maître d' (New residents welcome)
C.A.S.T. volunteer, supporter and advocate
http://www.castforkids.org/
|
AkKings
Offline
Chromer
Profile Status:
Reged: 10/29/03
Posts: 780
Loc: Kelso Wa
|
|
Quote:
As far as rods go, stay away from roller tips. Get one with a ceramic tip. The rollers rust and seize up, or the line slips off (especially braid) and gets caught up between the roller and the frame and then it fray's the line.
Been using roller guides for years, never had any of those problems.
|
Gooose
Offline
Ancient Mod
Profile Status:
Reged: 09/14/01
Posts: 11013
Loc: Area 12
|
|
Course you could always go with an electric which I believe are now legal in Washington.
--------------------
Independent Advocate For The Fish
Not Represented By Any Organization
Simple Solutions to Simple Problems
Simple Solutions to Complex Problems
There's lies, damned lies and then there are statistics......Mark Twain
|
archy99
Offline
Chromer
Profile Status:
Reged: 09/07/05
Posts: 522
Loc: Everett, WA.
|
|
You can find a boat load of Penn Senators on Ebay...real popular on the east coast in all sizes, and since they have been made for many years, you can pick up some interesting one-offs and customs (frames, etc) that have come out over the years. Great reels.
--------------------
Beyond this, where there is no memory, the countryside lies vacant. -Indra Kagis McEwan
|
archy99
Offline
Chromer
Profile Status:
Reged: 09/07/05
Posts: 522
Loc: Everett, WA.
|
|
For instance...
http://cgi.ebay.com/penn-senator-16-0-14...1QQcmdZViewItem
...I'd hate to have the bill for loading that thing each season.  Though you could probably just peel off the top 1/4 inch layer and only lose a 1/8 of a mile capacity.
Two miles of 130# mono...ouch.
--------------------
Beyond this, where there is no memory, the countryside lies vacant. -Indra Kagis McEwan
|
ondarvr
Offline
Chromer
Profile Status:
Reged: 03/20/05
Posts: 613
Loc: Monroe WA
|
|
I've been looking at the Penns on Ebay and they do have some nice custom ones. I've bid on a couple nice ones (stock) but as normal on ebay, the bidding can get very high and after shipping it's about the same price as getting one local.
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
[Re: